Страница 1 из 1

27c010 will read fine but wont program !

Добавлено: Вт июл 16, 2013 11:35 am
dave11674
hi guys having problems doing these chips
and them being OTP is a pain

so i believe i can swap this chip for a 29f010

so ordered some of them

but why wont my pcb5 willem flash the blank ones i have ???

i have selected the correct chip from the device

i have tried in the on board plc32 socket and in my adapter i have also
both read fine no problems
both blank check fine (blank ok)

but when i try to flash error straight away !!!

any ideas ??

ill include a couple of pics of my willem so you can see how its setup
im thinking the jumpers are setup right
ive tried with both usb and external 12v power supply

software versions tried 0.97ja & 98d12c3

puzzled.com !!

thanks

dave



Изображение

Изображение

Изображение

27c010 will read fine but wont program

Добавлено: Ср окт 07, 2020 2:22 pm
DonnaRog
Hi everybody

I need to put the usbuirt device about 20 feet away from my PC.
So I was thinking about an extension.

Will it work?

Thanks for your time

Stefano.