Страница 1 из 1

Ezoflash 4.5 not working

Добавлено: Вс окт 06, 2013 7:38 am
bogdan_meseriasu
Hy! My name is Bogdan. I built Ezoflash 4.5. but i cannot manage it to work. When i plug paralel cable to ezo red led powers on. Then i start program and when i plug dc adapter to ezo the red led is lighting more powerful. When i do test hardware it returns with an error. Chek conection or power. Al the IC are powered with meassured 5 v. I cheked the PCB and found no error. I dont know what it can be wrong. Please help me! I have to program a winbound and i cannot use my ezo. Please help. Thanks in advance!

Re: Ezoflash 4.5 not working

Добавлено: Вс окт 06, 2013 8:08 am
Ezo
1. Visual check - solderings , components (types, orientation)
2. Voltages check with power supply only
3. Programmer signal voltage measures in Test H/W one by one
4. Programmer output check with empty read
Details http://www.ezoflash.com/downloads/4v5_install_test.zip
Come back with report at fail step

-

Добавлено: Вт ноя 30, 2021 11:52 am
Williamcut
hi, the giro-z transponder i have is not working, i checked it with camera, and no IR light is on. i change cable, to a newer one and its still not working.


can you tell me whats the problem? the transponder run right the previous days.