New willem software 0.98d12

New willem software 0.98d12

Сообщение Ezo Пн ноя 08, 2010 5:16 pm

New Willem programmer software 0.98d12, original by mpu51_avr
Thanks to author !
Ver 98D12

-29/08/2010
Test+Verify chip

ATMEL : AT25DF041, AT25DF321, AT26DF081, AT26DF321, AT25F512
SST: SST25VF040B, SST25VF080B, SST25LF080A
Numonyx(ST): M25P80 ,M25P05
EON: EN25T80, EN25F80(ID,PRO,ERASE OK---READ=random)
MXIC: MX25L1605, MX25L4005,
PMC: Pm25LV512
WINBOND: W25X16V,W25B040A
-------------------------
SPI EEPROM
ATMEL : AT25256, AT25040
Microchip : 25LC256, 25LC040, 25LC640
-------------------------
I2C EEPROM
: S24C02
ATMEL : AT24C01,AT24C04, AT24C1024,AT24C64
Microchip : 24LC08, 24LC16, 24LC32, 24LC512, 24LC515,24LC1025
-------------------------
- 10/08/2010
Fixed 24LC515, 24LC1025, AT24C1024
- 17/12/2009
Fixed SPI EEPROM 25x020,25x040
Ezo
------
 
Сообщения: 2042
Зарегистрирован: Пн янв 03, 2005 6:50 pm
Откуда: Riga

Re: New willem software 0.98d12

Сообщение Ezo Пн ноя 08, 2010 5:56 pm

Excellent response from SW author :D :D :D . Thanks !

New updates by mpu51_avr , latest test versions
Willem software 0.98d12c3 for ezoflash4v5/pcb5.0,
version for ezoflash4v4/pcb3 0.97d12c3

- added data flash support (AT45DF..., M45...)
- extended SPI flash memory support to practically all devices
- fixed Atmel SPI Flash problems and more
- SPI flash autoselection
- added AVR 8bit (ATtiny, ATmega) serial SPI programming
- added MCS-51 (AT90Sxxx) ISP serial programming
- updated I2C and SPI EEPROMs programming
and more....

Unfortunately cooperation paused , version not finalized.
Some bugs found , reported, but not fixed.
mpu_avr now busy, I hope on return.
Enjoy SW use :P :P :P :D

Updated ezoflash4v5 chip_tests database (v27).
New ezoflash4v5 adapters-
SER_B1 (1.8V spi flash base adapter)
TSOP28_D1, SOIC28_B1, SOIC8_B1 (data flash adapters, with ser_a1b)
ATTINY _A1, ATMEGA_A1 ( AVR 8bit MCU DIP adapters)
TQFP32_A1,B1, TQFP_44A1,B2, TQFP64_A1,B1 (AVR 8bit MCU TQFP adapters)
AT89S_A2 (MCS-51 ISP adapter for DIP40,PLCC44,DIP28)
and more....
Part of docs available, other wait soon.
Ezo
------
 
Сообщения: 2042
Зарегистрирован: Пн янв 03, 2005 6:50 pm
Откуда: Riga

Re: New willem software 0.98d12

Сообщение tps_star Вт ноя 09, 2010 9:43 am

very good software
good new
but if change hardwre to usb is very very good
tps_star
 
Сообщения: 262
Зарегистрирован: Чт фев 15, 2007 9:09 am

Re: New willem software 0.98d12

Сообщение tps_star Пт ноя 04, 2011 9:44 am

hi ezo
new software is available or not ?
for example add 29gl128,29gl256,29lv320,29lv640
tps_star
 
Сообщения: 262
Зарегистрирован: Чт фев 15, 2007 9:09 am

Re: New willem software 0.98d12

Сообщение Ezo Вс ноя 06, 2011 7:40 pm

new software is available or not ?
for example add 29gl128,29gl256,29lv320,29lv640

Not available. No communication and reply from SW author.
For mentioned chips read/write chip in 32Mb blocks and manage highest adress manually.
Ezo
------
 
Сообщения: 2042
Зарегистрирован: Пн янв 03, 2005 6:50 pm
Откуда: Riga

Re: New willem software 0.98d12

Сообщение tps_star Ср сен 19, 2012 7:16 pm

new software or hardware is available ?
tps_star
 
Сообщения: 262
Зарегистрирован: Чт фев 15, 2007 9:09 am


Вернуться в EzoFlash programmer

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1

cron