EZoFlash форум

Hi everyone!
my name is Jo from France. Beginner about programming roms and electronic.

I would like program a MX29L3211 eeprom with PSOP44 adapter.
http://www.ezoflash.com/adapters/psop44c1/settings.htm

However i didn't understood which device i have to select ?

Thx for your help.

Chip not tested.
Select chip
Adapter 3.3V > 29VF/39LF/VF/49LFxxx > 29LVx00 (8/16bit)> 29LV320
Jumpers
- Vcc=2.7-3.6V. Jumpers Jp2 (+3.6V), Jp5 (A18) , Jp9 (pin44 A20), Jp11 (pin1 WE#)
Macronix MX29L3211
Come back with results.