Can Willem program SST39VF080

By: dommer - 2008-02-03 00:52:27

I have recently purchase a Willem Programmer and the TSOP adaptor with the intention to program the SST39VF080, but unable to find the type in the device list. Appreciate if anyone can confirm if the Willem can program SST39VF080, and what device type should be used. And if not, anyway to ger around it. Thanks in advance.

Re: Can Willem program SST39VF080

By: EZo - 2008-02-03 01:53:12

Try select AM29F080. Note chip is 3.3V device.

Re: Can Willem program SST39VF080

By: dommer - 2008-02-03 02:47:28

EZo wrote on 02/03/08 at 01:53:12:
Try select AM29F080. Note chip is 3.3V device.

Thanks, already did, no joy. I have verified on the web that the pin assignment between the two is different.

Re: Can Willem program SST39VF080

By: EZo - 2008-02-03 09:25:31

Yes, chip pinouts are different, that is only adapter problem.
SST39VF080 is verified on ezoflash+/tsop40a3, SW 0.97ja, selected Am29F080. Chip AM29F080 is verified on ezoflash+/tsop40b2.
What TSOP adapters do you have ? Sivava TSOP adapters package has equal base adapters TSOP40A (T05), TSOP40B (T06).

Re: Can Willem program SST39VF080

By: dommer - 2008-02-04 11:31:17

Many thanks, you really give me some hopes. Unfortunately I am totally new to Willem, and I am not quite sure what you meant by "ezoflash+/tsop40b2.", as my Willem only comes with "SW 0.97ja", and TSOP40B, and to be exact, this is what I got (from eBay): http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=200184560582&ssPag...

Re: Can Willem program SST39VF080

By: EZo - 2008-02-04 12:43:16

Unfortunately your chip SST39VF080 is not supported by purchased TSOP40B. TSOP40A required.

Re: Can Willem program SST39VF080

By: dommer - 2008-02-11 09:59:40

EZo,
Many thanks for your confirmation and pointing me to the right direction. I have managed to program (copy) successfully 39VF080 with TSOP40A (Built my own from Vero board) by selecting AM29F080 using SW 0.97a as suggested.

Re: Can Willem program SST39VF080

By: tattootroy - 2008-09-04 02:24:19

dommer wrote on 02/11/08 at 09:59:40:
EZo,
Many thanks for your confirmation and pointing me to the right direction. I have managed to program (copy) successfully 39VF080 with TSOP40A (Built my own from Vero board) by selecting AM29F080 using SW 0.97a as suggested.


di dyou buld your own tsop 40 pin socket. if so can you give me info on how you did it?

i have a willem 4.5 32 zif. i dont have the socket for it.
i have a SST39VF080 laptop bios i want to flash.
i need to know what pins from the tsop goes to willem zif socket.
any help would be great