Help with Parallel Dual Power Willem Programmer

By: kp4rv - 2008-03-16 00:40:49

Bought a 48 pins Tsop adapter and came with 3 wires Label A19, A20 and A21. I will like to know where must be connected inorder to work properley and which software is able to program tsops SST 39VF1601


I Got a picture, How I insert a Photo on this thread?

Re: Help with Parallel Dual Power Willem Programme

By: EZo - 2008-03-16 15:51:21

16bit flash adapter required (sivava T01/T07). I suppose you have a generic 8 bit flash adapter.

Re: Help with Parallel Dual Power Willem Programme

By: kp4rv - 2008-03-16 20:18:17

The one i mencioned is a 16 bit also. The seller from Canada that sells Willem programmer PCB recommended to me.

url=http://www.servimg.com/image_preview.php?i=145&u=11914023] [/url]

Re: Help with Parallel Dual Power Willem Programme

By: EZo - 2008-03-16 22:30:57

Pinout is the same on both connectors. CLK top pin in line on programmer, CLK left pin on adapter.  Pin5 A20, Pin6 A19. A21 not required. Pin 2 A19 on adapter NC (sivava design)