Power supplay

By: msadek - 2008-06-06 15:54:24

Pleas help me , I just have new programmer version 4.5c from sivava.
1- tHE POWER SUPPLY AC OR DC and how many volt must get by voltmeter befor connect , and what is the polerity ?
2- how can i set vpp and vdd and on what basics .
3- how can i detrmine th voltage 5,5.6 ,12 or 21
4- if ihave to get the ship data sheet befor programming
what about programmer ver6 i found in abey site
pleas help me

Re: Power supplay

By: DL - 2008-06-06 17:36:46

Hi,
msadek wrote on 06/06/08 at 15:54:24:
Pleas help me , I just have new programmer version 4.5c from sivava.
1- tHE POWER SUPPLY AC OR DC and how many volt must get by voltmeter befor connect , and what is the polerity ?
The supply can be 10-12VDC or 9VAC, current rating at least 500mA.  Your programmer has a bridge rectifier, so polarity for DC doesn't matter.
Quote:
2- how can i set vpp and vdd and on what basics .
There are 2 headers near the step-up regulator for VPP and 1 near the 7805 for VCC.
Quote:
3- how can i detrmine th voltage 5,5.6 ,12 or 21
You should have gotten documentation with your programmer that tells you how to do this.  The VCC options are sometimes labeled.  If you don't have documentation, experiment with jumper positions and measure voltages.
Quote:
4- if ihave to get the ship data sheet befor programming
what about programmer ver6 i found in abey site
Need more information.

HTH,
Dennis

Re: Power supplay

By: msadek - 2008-06-29 19:27:17

Thank uou and I hope to be in contact alwayes