Страница 1 из 1

Willem PCB PCB50a doen't work

Добавлено: Ср июн 26, 2013 9:36 pm
RedScorpion
Hi guys,

iam working with the lpt version of willem pcb and have pcb revision 50a.

I used this device for 6 years and today it doesnt work.

Yesterday i solder a tsop 29F032 flashchip and want test the ID.

From this moment the willem recognized nothing. I have different adapters like for 27C322,29F032 TSOp 40 and also us 27c801 eproms.

X-Test with other pc and usb cable -> same issue
X-Test with other lpt calbe -> not tried yet.

The function "Test hardware" works sometimes with other settings, but the most of the time i got the "Hardware error"...

I think any part of the pcb could be broken, but which?

Which parts are responsible for detecting the hardware, energie and so on?

I hope anyone could help

Thanks.

red

Re: Willem PCB PCB50a doen't work

Добавлено: Чт июн 27, 2013 8:35 pm
Ezo
What are Test H/W results ? Start with Vcc and Vpp activation. Are LEDs on ?
What power supply used (USB or external) and it selection jumper status ?

Re: Willem PCB PCB50a doen't work

Добавлено: Чт июн 27, 2013 10:22 pm
RedScorpion
hi Ezo,

thanks for your feedback.

Teh H/W Test said "Hardware error: Check connections"
The VPP LED is on, the VCC only a little bit.

I have tested the usb power and ac adapter. Same problem.

One day before the eprome goes off the VCC LED was complete on, so i think some part is defective?!

Thanks

red

Re: Willem PCB PCB50a doen't work

Добавлено: Чт июн 27, 2013 10:33 pm
Ezo
Check Vcc switch transistor BC557/BC327

Re: Willem PCB PCB50a doen't work

Добавлено: Чт июн 27, 2013 11:06 pm
RedScorpion
This was the first thing what i want to replace.

I have ordered revision PCB50b and will use this part for a test.

I give feedback asap i can! ;)

If i want replace this part, could you check which part is the right for the willem?!

For BC557

http://www.reichelt.de/BC-Transistoren/ ... nr=BC+557A

http://www.reichelt.de/BC-Transistoren/ ... nr=BC+557B

http://www.reichelt.de/BC-Transistoren/ ... nr=BC+557C
Thanks


For BC327

http://www.reichelt.de/BC-Transistoren/ ... =BC+327-16

http://www.reichelt.de/BC-Transistoren/ ... =BC+327-25

http://www.reichelt.de/BC-Transistoren/ ... =BC+327-40
red

Re: Willem PCB PCB50a doen't work

Добавлено: Пт июн 28, 2013 2:46 pm
Ezo
preferable BC327-40
Check voltages on pins with old transistor, Test H/W Vcc-On and Vcc-off
Are you sure here is no short in Vcc line (programmer lines , adapter) ?

Re: Willem PCB PCB50a doen't work

Добавлено: Пт июн 28, 2013 5:36 pm
RedScorpion
The VCC led could set off and on in testmode.

Will test the transistor and give feedback asap.

Iam sure that is note a short on vcc

thanks

red

Re: Willem PCB PCB50a doen't work

Добавлено: Чт июл 04, 2013 9:44 pm
RedScorpion
RedScorpion писал(а):The VCC led could set off and on in testmode.

Will test the transistor and give feedback asap.

Iam sure that is note a short on vcc

thanks

red
hi Ezo,

i have change the two parts and willem works again.

thanks for you help

red