EZoFlash форум

New Willem programmer software 0.98d12, original by mpu51_avr
Thanks to author !
Ver 98D12

-29/08/2010
Test+Verify chip

ATMEL : AT25DF041, AT25DF321, AT26DF081, AT26DF321, AT25F512
SST: SST25VF040B, SST25VF080B, SST25LF080A
Numonyx(ST): M25P80 ,M25P05
EON: EN25T80, EN25F80(ID,PRO,ERASE OK---READ=random)
MXIC: MX25L1605, MX25L4005,
PMC: Pm25LV512
WINBOND: W25X16V,W25B040A
-------------------------
SPI EEPROM
ATMEL : AT25256, AT25040
Microchip : 25LC256, 25LC040, 25LC640
-------------------------
I2C EEPROM
: S24C02
ATMEL : AT24C01,AT24C04, AT24C1024,AT24C64
Microchip : 24LC08, 24LC16, 24LC32, 24LC512, 24LC515,24LC1025
-------------------------
- 10/08/2010
Fixed 24LC515, 24LC1025, AT24C1024
- 17/12/2009
Fixed SPI EEPROM 25x020,25x040

Excellent response from SW author . Thanks !

New updates by mpu51_avr , latest test versions
Willem software 0.98d12c3 for ezoflash4v5/pcb5.0,
version for ezoflash4v4/pcb3 0.97d12c3

- added data flash support (AT45DF..., M45...)
- extended SPI flash memory support to practically all devices
- fixed Atmel SPI Flash problems and more
- SPI flash autoselection
- added AVR 8bit (ATtiny, ATmega) serial SPI programming
- added MCS-51 (AT90Sxxx) ISP serial programming
- updated I2C and SPI EEPROMs programming
and more....

Unfortunately cooperation paused , version not finalized.
Some bugs found , reported, but not fixed.
mpu_avr now busy, I hope on return.
Enjoy SW use

Updated ezoflash4v5 chip_tests database (v27).
New ezoflash4v5 adapters-
SER_B1 (1.8V spi flash base adapter)
TSOP28_D1, SOIC28_B1, SOIC8_B1 (data flash adapters, with ser_a1b)
ATTINY _A1, ATMEGA_A1 ( AVR 8bit MCU DIP adapters)
TQFP32_A1,B1, TQFP_44A1,B2, TQFP64_A1,B1 (AVR 8bit MCU TQFP adapters)
AT89S_A2 (MCS-51 ISP adapter for DIP40,PLCC44,DIP28)
and more....
Part of docs available, other wait soon.

very good software
good new
but if change hardwre to usb is very very good

hi ezo
new software is available or not ?
for example add 29gl128,29gl256,29lv320,29lv640

new software is available or not ?
for example add 29gl128,29gl256,29lv320,29lv640

Not available. No communication and reply from SW author.
For mentioned chips read/write chip in 32Mb blocks and manage highest adress manually.

new software or hardware is available ?