S29GL512 TSOP56
Hello , possible to read and write Spansion S29GL512 TSOP56? wich adapter need to use?
TSOP-48_D3 ? jumper settings ?
i need to make backup from this chip , and write it one another chip.
possible with ezo V4.5 ?
TSOP-48_D3 ? jumper settings ?
i need to make backup from this chip , and write it one another chip.
possible with ezo V4.5 ?
Re: S29GL512 TSOP56
i need to use tsop48_d3 adapter
manualy select 4 jumper A21 A22 A23 A24 with 2.2k rezistor to vcc and 4x jp to gnd . correct?
need to select AM29DL322? correct?
after that with 4 jumper possible to read the chip in 16 x 32mb ?
pls help me ..
manualy select 4 jumper A21 A22 A23 A24 with 2.2k rezistor to vcc and 4x jp to gnd . correct?
need to select AM29DL322? correct?
after that with 4 jumper possible to read the chip in 16 x 32mb ?
pls help me ..
Re: S29GL512 TSOP56
You are right.i need to use tsop48_d3 adapter
manualy select 4 jumper A21 A22 A23 A24 with 2.2k rezistor to vcc and 4x jp to gnd . correct?
need to select AM29DL322? correct?
after that with 4 jumper possible to read the chip in 16 x 32mb ?
Some mods required - tsop48d3 has resistor and jumper for A21 and A22 only (up to 128Mb) .
You have to add extra 2 blocks (resistor 2k2 to Vcc and jumper/wire to gnd) for A23 (pin1/tsop56) and A24 (pin56/tsop56).
Manage all 4 adress to select right read adress range.
Read carefully S29GL128 guide.
Re: S29GL512 TSOP56
ok thx for fast reply , i haven;t dificulty with erase chip , extID_erase16_512 ,
on ezo programmer need to set from jp98 to jp97
this jumper settings jp97 only for erase ? and for read and write chip set back to jp98 ?
on ezo programmer need to set from jp98 to jp97
this jumper settings jp97 only for erase ? and for read and write chip set back to jp98 ?
Re: S29GL512 TSOP56
Set mode Jp97 for my utility only (ID and erase).
Set mode Jp98 for all actions with 0.98d12c3
Share your utility result screenshot (detect, ID, read, erase, read).
Seems , you have utility with extended erase timeout .
Set mode Jp98 for all actions with 0.98d12c3
Share your utility result screenshot (detect, ID, read, erase, read).
Seems , you have utility with extended erase timeout .
Re: S29GL512 TSOP56
hello this the result
- Вложения
-
- electrinic id
- untitled1.JPG (70.92КБ)13808 просмотров
-
- detected chip with extID_erase16_512
- untitled2.JPG (30.68КБ)13808 просмотров
-
- after erase this is the result
- untitled4.JPG (104.38КБ)13808 просмотров
Re: S29GL512 TSOP56
one question , jp A, B ,C ,D ,E is open? on adapter ...
on chip pin 11 - A19 is not conected when open jp , and pin 17 - RY/BY#
this is correct or not ?
on chip pin 11 - A19 is not conected when open jp , and pin 17 - RY/BY#
this is correct or not ?
Re: S29GL512 TSOP56
ok problen sloved Need to conect jp B -C to have conection chip pin 11 to A19!!!
After that ERASE > BLANK TEST > WRITE > VERIFY is ok !
My problem is how i can set the 4 jumper for correct order ,
A21 ..A24 for part 1 part2 ... part 16 , i tryed , don't undersund .....
pls help me
After that ERASE > BLANK TEST > WRITE > VERIFY is ok !
My problem is how i can set the 4 jumper for correct order ,
A21 ..A24 for part 1 part2 ... part 16 , i tryed , don't undersund .....
pls help me
Re: S29GL512 TSOP56
this is correct ?
(A21- log.0), (A22-log.0), ( A23- log.0), (A24- log.0) memory area 0-32Mb.
(A21- log.1), (A22-log.0), ( A23- log.0), (A24- log.0) memory area 32-64Mb.
(A21- log.0), (A22-log.1), ( A23- log.0), (A24- log.0) memory area 64-96Mb.
(A21- log.1), (A22-log.1), ( A23- log.0), (A24- log.0) memory area 96-128Mb.
(A21- log.0), (A22-log.0), ( A23- log.1), (A24- log.0) memory area 128-160Mb.
(A21- log.1), (A22-log.0), ( A23- log.1), (A24- log.0) memory area 160-192Mb.
(A21- log.0), (A22-log.1), ( A23- log.1), (A24- log.0) memory area 192-224Mb.
(A21- log.1), (A22-log.1), ( A23- log.1), (A24- log.0) memory area 224-256Mb.
(A21- log.0), (A22-log.0), ( A23- log.0), (A24- log.1) memory area 256-288Mb.
(A21- log.1), (A22-log.0), ( A23- log.0), (A24- log.1) memory area 288-320Mb.
(A21- log.0), (A22-log.1), ( A23- log.0), (A24- log.1) memory area 320-352Mb.
(A21- log.1), (A22-log.1), ( A23- log.0), (A24- log.1) memory area 352-384Mb.
(A21- log.0), (A22-log.0), ( A23- log.1), (A24- log.1) memory area 384-416Mb.
(A21- log.1), (A22-log.0), ( A23- log.1), (A24- log.1) memory area 416-448Mb.
(A21- log.0), (A22-log.1), ( A23- log.1), (A24- log.1) memory area 448-480Mb.
(A21- log.1), (A22-log.1), ( A23- log.1), (A24- log.1) memory area 480-512Mb.
(A21- log.0), (A22-log.0), ( A23- log.0), (A24- log.0) memory area 0-32Mb.
(A21- log.1), (A22-log.0), ( A23- log.0), (A24- log.0) memory area 32-64Mb.
(A21- log.0), (A22-log.1), ( A23- log.0), (A24- log.0) memory area 64-96Mb.
(A21- log.1), (A22-log.1), ( A23- log.0), (A24- log.0) memory area 96-128Mb.
(A21- log.0), (A22-log.0), ( A23- log.1), (A24- log.0) memory area 128-160Mb.
(A21- log.1), (A22-log.0), ( A23- log.1), (A24- log.0) memory area 160-192Mb.
(A21- log.0), (A22-log.1), ( A23- log.1), (A24- log.0) memory area 192-224Mb.
(A21- log.1), (A22-log.1), ( A23- log.1), (A24- log.0) memory area 224-256Mb.
(A21- log.0), (A22-log.0), ( A23- log.0), (A24- log.1) memory area 256-288Mb.
(A21- log.1), (A22-log.0), ( A23- log.0), (A24- log.1) memory area 288-320Mb.
(A21- log.0), (A22-log.1), ( A23- log.0), (A24- log.1) memory area 320-352Mb.
(A21- log.1), (A22-log.1), ( A23- log.0), (A24- log.1) memory area 352-384Mb.
(A21- log.0), (A22-log.0), ( A23- log.1), (A24- log.1) memory area 384-416Mb.
(A21- log.1), (A22-log.0), ( A23- log.1), (A24- log.1) memory area 416-448Mb.
(A21- log.0), (A22-log.1), ( A23- log.1), (A24- log.1) memory area 448-480Mb.
(A21- log.1), (A22-log.1), ( A23- log.1), (A24- log.1) memory area 480-512Mb.
Re: S29GL512 TSOP56
S29G128 guide:one question , jp A, B ,C ,D ,E is open? on adapter
Set tsop48d3 jumpers JpB (tsop56/pin11-A19), JpD (tsop56/pin15-A21)
pin not in useand pin 17 - RY/BY#
Yes. Binary counting.this is correct ?
(A21- log.0), (A22-log.0), ( A23- log.0), (A24- log.0) memory area 0-32Mb....
Note, set JpF (A21- log.0), set JpH (A22-log.0)
remove JpF (A21- log.1), remove JpH (A22-log.1)
Same for A23 and A24.
Re: S29GL512 TSOP56
ok thx for help