Найдено 2045 результатов
- Ср июл 15, 2015 7:30 pm
- Форум: Программатор EZoFlash+
- Тема: доработка для адаптеров ZIF40
- Ответы: 3
- Просмотры: 8558
Re: доработка для адаптеров ZIF40
нет общего стандарта
- Ср июл 15, 2015 7:27 pm
- Форум: Программатор EZoFlash+
- Тема: Адаптер к 27с..
- Ответы: 1
- Просмотры: 7651
Re: Адаптер к 27с..
требуется адаптер преобразователя dc2dca4 и джампера на адаптере как указано.
ряд чипов позволяет чтение без преобразователя , тогда и эти перемички
ряд чипов позволяет чтение без преобразователя , тогда и эти перемички
- Ср июн 10, 2015 6:59 pm
- Форум: Chip programming issues
- Тема: M27C322 in 8Bit mode
- Ответы: 6
- Просмотры: 8285
Re: M27C322 in 8Bit mode
I suppose to use 27C322 for programming as original 16bit chip device where source file modified 32 Mb with low byte as target, high byte n/a or any.You can't use reduced file size in sw.
- Вт июн 09, 2015 6:02 pm
- Форум: Chip programming issues
- Тема: M27C322 in 8Bit mode
- Ответы: 6
- Просмотры: 8285
Re: M27C322 in 8Bit mode
look on zif32 and dipswitch extended schematic
- Чт июн 04, 2015 8:02 pm
- Форум: Chip programming issues
- Тема: M27C322 in 8Bit mode
- Ответы: 6
- Просмотры: 8285
Re: M27C322 in 8Bit mode
Mentioned chip organized 16bit only, no 8bit option
- Сб май 23, 2015 7:32 pm
- Форум: Программатор EZoFlash+
- Тема: le28fw4101t
- Ответы: 2
- Просмотры: 8137
Re: le28fw4101t
Try as 29LV400 , ezoflash and tsop48b2 or equal willem and adapter
Chip details find here left in chip database, search LE28FW4101
Chip details find here left in chip database, search LE28FW4101
- Ср май 20, 2015 6:21 pm
- Форум: Программатор EZoFlash+
- Тема: Адаптер PROT_A1
- Ответы: 15
- Просмотры: 20955
Re: Адаптер PROT_A1
Непроверял, ограничений кроме режима 097 (pcb3b) недолжно быть.
- Пн май 04, 2015 6:59 am
- Форум: Willem programmers
- Тема: Willem 5.0E and 2732 eprom
- Ответы: 1
- Просмотры: 6488
Re: Willem 5.0E and 2732 eprom
New radial choke implemented on pcb5.0e. You can find same inductor on some other programmer versions. Most important things - external power , inductor and transistors
Read this post
Read this post
- Пн мар 16, 2015 8:07 pm
- Форум: Общие вопросы
- Тема: Использование EzoFlash на ноутбуке без LPT
- Ответы: 4
- Просмотры: 75132
Re: Использование EzoFlash на ноутбуке без LPT
Отличная новость
- Пн мар 16, 2015 8:06 pm
- Форум: Willem programmers
- Тема: ** SOLVED ** pcmcia parallel port will it work ??
- Ответы: 5
- Просмотры: 8695
- Вс фев 15, 2015 8:27 pm
- Форум: Chip programming issues
- Тема: s29GL128n will not Erase !! SOLVED
- Ответы: 17
- Просмотры: 15527
Re: s29GL128n will not Erase !!
It works ok with old pcb3b, crossadapter, tsop48d3, 0.97ja (selected 16bit, Am29DL322), both erase utilities downloaded from link. crossadapter - Jp5,Open3.6V, A19 and A20 linked to programmer Before erase all 4 blocks programmed with content and verified. Erased entire chip - both block jumpers F a...
- Пт фев 13, 2015 6:10 pm
- Форум: Chip programming issues
- Тема: s29GL128n will not Erase !! SOLVED
- Ответы: 17
- Просмотры: 15527
Re: s29GL128n will not Erase !!
I will compare 29GL128 functionality on both programmer sets.
Some known difference - pcb3 adress and logic levels are higher 4.3V
Unknown for both programmers - data protection variants and SecSi presence.
verified on chips are new , factory empty , on ezoflash4v5+ only
Some known difference - pcb3 adress and logic levels are higher 4.3V
Unknown for both programmers - data protection variants and SecSi presence.
verified on chips are new , factory empty , on ezoflash4v5+ only
- Вт фев 10, 2015 10:56 pm
- Форум: Chip programming issues
- Тема: s29GL128n will not Erase !! SOLVED
- Ответы: 17
- Просмотры: 15527
Re: s29GL128n will not Erase !!
I don't think so, cannot be damaged. It can be tied to Vcc.
Your confirmation -
no changes in chip content after erase (first 32Mb block)
no erased area after boot block in beginning of chip
same results with utility with extended erase time
Is it correct ?
Your confirmation -
no changes in chip content after erase (first 32Mb block)
no erased area after boot block in beginning of chip
same results with utility with extended erase time
Is it correct ?
- Вт фев 10, 2015 10:36 pm
- Форум: Chip programming issues
- Тема: s29GL128n will not Erase !! SOLVED
- Ответы: 17
- Просмотры: 15527
Re: s29GL128n will not Erase !!
2k2 pull-up resistor applied to #WP pin. It is installed on my adapters and range of chips tested.
But really can't explain why resistor missing in component diagram
But really can't explain why resistor missing in component diagram
- Вт фев 10, 2015 12:04 pm
- Форум: Chip programming issues
- Тема: s29GL128n will not Erase !! SOLVED
- Ответы: 17
- Просмотры: 15527
Re: s29GL128n will not Erase !!
Check read result (first 32MB) in buffer after adress 0x00FFFF. In case of protected first sector expect content up to 0x00FFFF, then should be erased FF FF What chip type do you have - full name with type at the end (-R1..-01 ,...)? 3.5 V should be OK Is any changes in chip content after erase comp...