MX29LV640DB

[Asu]

Ezo Hi, I can not program flash, that I am wrong, please I need your help.
Ezoflash4 +4 PJ2 and PJ5
TSOP48-b2 Pj9
Willem Eprom 97D12C2 (Test)
Selected device 29LV320
Flash MX29LV640DB (new)
ID = FF

As you see in the picture I can read 100%, but I can not program flash, revised welding and pin-electric scheme Ezoflash4 +4 and all ok.

[Asu]

Ezo Hi, sorry the problem was in the Lpt cable, replace with a new one and now if I get the OK ID, but the program gives me error.

Ezoflash4+4 pj2 y 4
Tsop48_b2 pj9

regards

[Asu]

It seems that the problem was solved, the error was because I wanted to program .bin 8.100KB , divided Winsplit With Tool 2 4.050KB, .bin_1, .bin_2 program time and hassle.

Tsop48_b2 JP9 (A21 log.0) = 0-32 Mb .bin_1?
Tsop48_b2 JP7 = (A21 log.1) = 32-64 Mb .bin_2?

regards