HI EZO
i will make tsop48d3 your new schematic have a22 address for tsop56
i will just make for tsop48
this old schematic is working or i must make pcb with new schematic
old schematic : http://www.ezoflash.com/downloads/tsop48d3_mod.PNG
and jumper setting old and new schematic is same ?
please give me jumper setting for this 2 device
1: sst39vf1601 for this i must set just jumper B
2: 28f160c3t for this i must set jumper A and C or other ?
ADAPTER TSOP48D3
Re: ADAPTER TSOP48D3
Yesand jumper setting old and new schematic is same ?
All options are available here, you can read chip_test file also.please give me jumper setting for this 2 device
1: sst39vf1601 for this i must set just jumper B
2: 28f160c3t for this i must set jumper A and C or other ?
Jumper C is required for 64Mb chips only (pin 9 A21), JpF on/off turns pin 9/A21 log0/1
Draw your schematic for Willem (?) , I will approve or modify.i will make tsop48d3 your new schematic
Re: ADAPTER TSOP48D3
thancks for info
but in this page http://www.ezoflash.com/adapters/tsop48 ... _chips.htm for ic 28f160c3t this option : Vcc=3.3V, Vpp=3.3V. Jumpers Jp2 (+3.6V), Jp5 (A18), JpA (pin15-A19)
but in your pdf file is this Vcc=3.3V, Vpp=3.3V. Jumpers Jp2 (+3.6V), Jp5 (A18), JpAA (pin9-A21,pin15-A19)
how is true ?
and jumper F for this 2 device sst39vf1601& 28f160c3t is on ?
but in this page http://www.ezoflash.com/adapters/tsop48 ... _chips.htm for ic 28f160c3t this option : Vcc=3.3V, Vpp=3.3V. Jumpers Jp2 (+3.6V), Jp5 (A18), JpA (pin15-A19)
but in your pdf file is this Vcc=3.3V, Vpp=3.3V. Jumpers Jp2 (+3.6V), Jp5 (A18), JpAA (pin9-A21,pin15-A19)
how is true ?
and jumper F for this 2 device sst39vf1601& 28f160c3t is on ?
Re: ADAPTER TSOP48D3
Here is no matter pin 9 /A21 connected or not.how is true ?
Where you find F apply ?and jumper F for this 2 device sst39vf1601& 28f160c3t is on ?
>>>> Read again tsop48d3 docs
Common jumper selection:
A - pin15 A19, B - pin9 A19, C - pin9 A21, D - pin13 A21, E - pin13 Vpp=Vcc,
F - A21 log0 (F-off A21 log1), H - A22 log0 (H-off A22 log1)