TSOP-48_D3

[Albert-M]

hello i maked this adapter TSOP-48_D3 , my problem is i don't have 6.8k rpack , 10K rpack is ok ?

[Ezo]

You can use nominal 4.7k , 6k8 or 10k.
You can use 8 resistor pack, marked pin move to second pin.

[Albert-M]

ok , the 10k is ok ? with 8 pack?

[Ezo]

Depends what you have - 8 resistor (9pin) or 9 resistor (10pin) pack . Latest in component list, both are valid.

[Albert-M]

9 pin rezistor pack

[Ezo]

Then skip first R pack hole on adapter. Marked Rpack pin place in next one.

[Albert-M]

thx the adapter work ok , my problem is how i can download utilty erase 2 for 29lv651ue?

[Ezo]

Most common details find in guide
viewtopic.php?f=9&t=4569
New utility extID_erase16.exe available
http://www.ezoflash.com/downloads/softw ... rase16.zip
Additional 29LV651 info/results in chip_test file.

[Albert-M]

thank u , all ok . read erase and write , in 2x32mb .

[Ezo]

Don't forget start always with get ID

[Albert-M]

ok .
. thx

[Albert-M]

hello big problem , jp-H for this chip on or off?

[Ezo]

Jumper H (A22) only for 128Mb chips in TSOP56 package.

[Albert-M]

ok , For tsop48 29LV651UE need to remove the H Jumper ? olways ON or olways OFF ?

[Ezo]

Jumper not mentioned in chip test line, in tsop48d3 settings for 29LV651 - means jumper H off, not installed. Particularry for your chips - no matter JpH on or off.